Billion BiPAC 7401VGP Bedienungsanleitung PDF herunterladen (Seite 46)

Ethernet Client Filter

The Ethernet Client Filter can support up to 16 Ethernet network computers. It enables you to

accept traffic from specific authorized computers or can restrict unwanted computer(s) to access

your LAN.

There are no pre-defined Ethernet MAC address filter rules, you can add the filter rules to meet your

requirements.

Ethernet Client Filter: Default setting is set Disable.

Allowed: check to enable a specific PC to access your LAN by inserting the MAC Address in

the space provided or click the Candidate button. Make sure your PC’s MAC is listed.

Blocked: check to prevent an unwanted PC from accessing your LAN by inserting the MAC

Address in the space provided or click the Candidate button. Make sure your PC’s MAC is not

listed.

The maximum number of client is 16. The MAC addresses should be 6 bytes long and are presented

only in hexadecimal characters. Only numbers (0 - 9) and letters (a - f) are acceptable.

Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included.

Candidates: automatically detects devices that are connected to the router through the Ethernet.

Click the Candidate button to access the Active PC in LAN window.

Active PC in LAN: Active PC in LAN window displays a list of IP Address & MAC Address of each

Ethernet device which connects to the router.

You can check the checkbox next to the IP address to block or to allow the PC from accessing the

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 156 157

Keine Kommentare

Billion BiPAC 7401VGP Bedienungsanleitung Seite 46